Our Equipment
Dynamic Sampling
Geo Environmental Engineering specialises in dynamic sampling with windowless and window sampling rigs, with dynamic probe and diamond coring capabilities detailed below:
- Windowless sampling (soil samples are recovered in plastic liners) up to 10 metres depth can be achieved using a tracked Dart/Competitor style rig.
- Dynamic probing up to 20 metres deep to BS1377:1990.
- SPT’s (Soil penetration testing using open drive shoe) & SPT(C) (Solid Cone) for sand/gravel strata.
- Hand Held sampling for low head room or confined areas where access for the tracked rig is not possible using a hydraulic hammer to drive the samples into the strata.
- Concrete coring off the rig for drilling on hard standing.
- Stand alone diamond coring unit (electric powered) for hole up to 350mm diameters & to a depth of 1.5metres.
- Hand dug trial pits to expose footings, utilities etc.
- Water/gas well installations for long term monitoring.
- SVS Surveys (soil vapour surveys) to determine gas presence before drilling on Petroleum service stations etc.
- NVQ Level 2 Drillers experienced in logging to BS5930 and Eurocode 7.
Cable Percussion Drilling
Geo Environmental Engineering can undertake cable percussion drilling detailed below:
- 150mm and 200mm diameter boring to depths of c.50m below current ground levels.
- Insitu testing to include SPT’s and CPT’s.
- Insitu sampling to include geotechnical (U100) and contamination (Amber Glass Jars) related sample recovery.
- Insitu Water Sampling possible (where encountered).
- Rising and falling head tests.
- Water/gas well installations for long term monitoring.
- NVQ Level 2 Drillers experienced in logging to BS5930 and Eurocode 7.
Rotary Drilling
Geo Environmental Engineering can undertake rotary drilling detailed below:
- Rotary open hole or rotary coring.
- Probing for shallow mine workings.
- Drilling and grouting mineshafts and mine workings.
- Rock Coring and Sampling.
- Insitu SPT’s.
- ODEX (Simultaneous drilling and casing).
- NVQ Level 2 Drillers experienced in logging to BS5930 and Eurocode 7.